PRODUCTS

The spiral forming process uses hot rolled steel coil as a raw material. Spiral welded steel pipes are categorized by its continuous welded helical seam from end to end, which also gives its additional stiffness. Because of the method of manufacture, a wide variety of diameters can be produced. The diameter tolerance is small, particularly with regards to ovality; and the pipe, due to its axial symmetry, has an inherent straightness. Material used are general structural steel that are in accordance with BS EN 10025. A commonly steel used are grade S275 for water pipes and S355 for structural pipes. Other steel grades used are ASTM A36 and API 5L steel grade up to X56.

Spiral welded pipes are produced in accordance with the dimensional andtolerance requirements of various BS EN, ISO, AWWA, API and AS/NZ specifications.

Listed below is a summary of our capabilities:

  • Sizes ND 150mm through ND 3000mm
  • Wall thickness up to 25mm
  • Nominal lengths from 6m through 15m
  • Long length pile up to 105ml (spliced)

PPI is capable of supplying bare and specially coated steel pipes.

 
External Internal
  • Epoxy/epoxy modified paint
  • Epoxy / polyester glassflake
  • 100% solid polyurethane (PU)
  • Reinforced bitumen / coal tar
  • Hot dip galvanized
  • Epoxy/epoxy modified paint
  • 100% solid polyurethane (PU)
  • Concrete / cement mortar
  • Hot dip galvanized